COBB Accessport V3 ECU Flasher - Ford Focus RS B1 Package
- COBB Accessport V3
- mountune Custom Calibration
- mountune High Flow Air Filter
The mountune Focus RS B1 upgrade package includes the very best components to enhance and optimize the performance of
your Focus RS including custom ECU calibration to optimize the performance of
your car based on your specific use and build specification. mountune
performance calibrations are proven to extract the maximum reliable performance
and the mountune B series upgrade packages bring together the essential pieces
to get you going.
We rely on the industry’s best tuning/flashing
device, the COBB Accessport, to deliver our proven ECU calibrations. The
Accessport coupled with mountune’s custom performance calibration, unlocks
power hidden within the factory ECU calibration by replacing conservative
factory settings with more aggressive calibrations. The COBB
Accessport from mountune USA includes all of the standard COBB calibrations
along with a custom mountune calibration* built to your specifications based on
your modifications, octane, and preferences. The results are impressive gains in
torque and horsepower with incredible custom features that can be adjusted to meet your requirements. Our calibration team has more Focus RS tuning experience
than any other source available to you. Our team has spent countless hours on
the dyno and track developing performance upgrades that perform in a wide range
of applications. Choose from one of the
many upgrade packages to enhance your Focus RS.
Mountune Performance calibration slot assignments**
The mountune calibrations include 4 slots that are switchable at any time, on the fly, by simply pushing a few buttons. This is a very convenient feature that can be further adjusted in many cases. The default settings for the Focus RS are laid out as such:
- Slot 1 - Standard high performance calibration
- Slot 2 - Standard high performance calibration with indicated Launch Control and Flat Foot Shifting
- Slot 3 - Low boost performance calibration
- Slot 4 - Same as Slot 1 with LESS spark (aka panic mode / bad fuel mode)
Maximize the performance of your Focus RS
For those who require additional support, the mountune ECU calibration can be optimized further with data logging and program revisions at no extra charge. Engine performance is enhanced by reviewing data logging files along with calibration revisions based on feedback from the end user. The duration of the calibration and file revision period for the chosen fuel type / octane is 45 days from the time the first file is sent to the customer, which is preloaded onto the AP when it ships out. Multiple calibrations can also be requested during this time period. Once the 45 day period has expired the free custom calibration period ends. Future custom calibrations are subject to additional fees depending on the exact nature of the request. mountune optimized Accessport calibrations are available only to customers who have purchased the Cobb Accessport directly from mountune.
Custom programming options include, but are not limited to:
- On-the-Fly MAP (slot) switching
- Auto Start / Stop disabling
- Launch Control settings
- Flat Foot Shifting settings
- Ethanol (E30 & E40) support
- 100+ Octane support
- Gear Based Torque Limiting
- Shift Assist settings
- Burn Out Mode
- Idle Adjustment
- Rev Limiters
- Speed Limiters
- Shift Light settings
- Advanced Wastegate Adjustments
- Low Traction / Wet Weather settings
*Please note this free offer for calibration optimization is not available for turbocharger upgrades, engine swaps, or nitrous oxide applications and applies to the original purchaser only. This service is non-transferable and other restrictions may apply. Some custom options are only available on vehicles equipped with manual transmissions. If you have questions about our mountune ECU calibrations please do not hesitate to contact us directly at (714) 424-9400 or at firstname.lastname@example.org for more information.
**Please note the switchable slots for the Focus RS are ONLY operational on Mountune calibrations created on or after 1-11-17. ECU Calibrations created prior to 1-11-17 do not have switchable slots. Nor do they have functional Flat Foot Shifting enabled. If you have early programming that does not support slot switching and FFS please contact us to get updated.
***Ford Focus RS with mountune cold air intake (part #2536-CAIS-BLK) installed. Green dyno run has aforementioned parts installed with stock ECU calibration. Red dyno run has aforementioned parts installed with Mountune USA AP ECU calibration.
This part has been designed and is intended for off-highway application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations relating to emission requirements and motor vehicle safety standards. Click Here for Emissions compliance information.