Home > Focus Performance > Focus Drivetrain >

mountune Quick-Shift - Ford Focus ST
mountune Quick-Shift - Ford Focus ST

Alternative Views:


Availability: Usually Ships in 24 to 48 Hours
Product Code: 2363-BSA-AA

Add mountune GearKnob for $45.00:

Description Installation Guide

mountune Quick-Shift - Ford Focus ST 2013-2017


The mountune quick-shift for the Focus ST replaces the factory shift arm located at the gearbox. Throw is reduced by 25% allowing quick and more precise gear changes. Engineered to OE tolerances and manufactured from hard anodized aluminum and steel.

  • Easy installation
  • Direct replacement for factory part
  • Hard anodized finish to ensure against corrosion
  • Drift tool included for easy installation
  • Made in USA


A shorter and crisper shifter throw provides a positive driving experience on the Focus ST. After considerable evaluation and input, mountune engineers determined the optimum reduction for the Focus ST shifter to be at 25%. This amount allows an enhanced driving experience while maintaining an OE quality and feel with minimal stress on the OE shift cables and components. Despite being 500g lighter than the OE component, thanks to being machined from solid aluminum upper bridge, the plated steel counterweights ensure positive shift engagement and smooth operation. All components are plated or anodized for years of durability.

Recommended product
mountune Gearknob

mountune Gearknob

Average Rating: 5 of 5 Total Reviews: 25 Write a review »

  0 of 0 people found the following review helpful:
ST Quick Shift March 13, 2017
Reviewer: Jon from Michigan  
To echo other reviews, this shift arm should have been the factory part. The 25% reduction is just right. Enough to feel it but not so much that it feels like an aggressive aftermarket reduction. There's a very mild increase if shift effort but it's practically negligible.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Love It! February 24, 2017
Reviewer: Michael Miles from Kingston, ON Canada  
Just installed the Mountune Quick Shift on my 2013 Focus ST and I love it.  The install went about as well as possible and took about 30 minutes.  I guess I got lucky as my roll pin came out in a few minutes without a problem.  I read  that having the car warm helps so I drove the car around a bit first.  I also used a mini sledge hammer and a roll pin punch (3/16ths) instead of the supplied tool.

One of the few things that took away from the sporty "feel" of the ST, in my opinion, was the longer shift throws.  The quick-shift has solved this issue for me.  The throws are noticeably shorter without any real noticeable change to the effort required to engage the gears.  The 25% reduction feels just about perfect to me and feels like how the car should have come from the factory.  The car almost feels quicker as you can snick through the gears just a bit quicker so you feel like you don't loose so much momentum if that makes any sense, especially the 1 - 2 gear change.  A+ Mountune!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Very happy with transaction February 23, 2017
Reviewer: Brian MacDonald from Westville , NS Canada  
Will be installed and tested in spring when car comes out of storage.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Great part! December 22, 2016
Reviewer: dave from highland, MI United States  
Put mine in my '16 Focus ST with about 700 miles on the odometer. Getting the roll pin out wasn't too difficult (low mileage helped with that). The only "issue" was when putting the Mountune part on the shaft. It seemed the hole was a little undersized, perhaps due to the black anodizing/powder coating changing the size a bit. Had to tap it down with a mallet, managed to line the roll pin up properly the first time (more luck than anything). Shortens the shifts up nicely, but R & 1st are a little bit stiffer to engage. Glad I like it because I'd hate to try to get that roll pin back out!!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Worth it..... December 13, 2016
Reviewer: Ray Wolfe from UNION BRIDGE, MD United States  
Quick and painless install, 25 minutes.

The car should as everyone else says.... come like this from the factory. Not as short as some shifter throws  on the market, but if your looking for that factory feel and still want something shorter than stock.... this is it.

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Focus Performance > Focus Drivetrain
Focus Performance