Home > Fiesta Performance >

mountune Roll Restrictor / Rear Motor Mount , Fiesta ST 2013-2017, Fiesta 2011-2017
mountune Roll Restrictor / Rear Motor Mount , Fiesta ST 2013-2017, Fiesta 2011-2017


 
Alternative Views:


Price:$149.00


Availability: Usually Ships in 24 Hours
Product Code: 2364-RR-AA
Qty:

Description Installation Guide
 

mountune Roll Restrictor / Rear Motor Mount , Fiesta ST 2013-2017, Fiesta 2011-2017

2364-RR-AA

The mountune roll-restrictor / RMM reduces the amount of engine roll/movement during hard acceleration and gear changing. With a product such as this, care must be taken with the design and choice of materials, as a poor design can destroy the feel and driving experience of the car. With an extensive background working in the OEM market, mountune have the knowledge and engineering expertise to create a product which can reduce the engine movement by the desired amount, but with minimal effect to the NVH (Noise Vibration Harshness) level.

The mountune roll restrictor is machined from high quality aluminum, and features black polyurethane front and large rear oval bushings engineered to control with horizontal plane NVH. The bonus of using polyurethane is that not only has it been engineered to give increased stiffness without causing excessive vibrations, it also doesn’t deteriorate like rubber does, so the service life of the component is greatly increased. Check out the installation video below!

  • High quality anodised billet aluminum body
  • Black Polyurethane bushes
  • Reduction in engine movement
  • Minimal effect on NVH
mountune Roll Restrictor Installation

Average Rating: 5 of 5 Total Reviews: 42 Write a review »

  0 of 0 people found the following review helpful:
 
mountune RMM September 16, 2017
Reviewer: PD from Pleasant Hill, CA United States  
The mountune rear engine mount for my 2017 Fiesta ST shipped immediately and was received ahead of expectations.  The mount is far superior to the stock mount and I'm a lot more confident that my first track outing will be successful.  Install was very straight-forward, but I would definitely recommend removing the brackets completely and tapping them apart as opposed to drilling.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Very nice part! September 10, 2017
Reviewer: Valentin Gard from Charrat, Wallis Switzerland  
Beautifful in all black. The fitting is perfect and easy. Do it job without beaing noisier inside the car.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Fiesta ST RMM May 29, 2017
Reviewer: Vic from Gladesville, New south wales Australia  
Perfect results. Great design.
My car now has perfect clutch engagement and throttle response. Handling is also improved as gear changes mid corner are so good now. Chassis feels stiffer with a very small amount of drive-train feedback through controls.
This mount should be your very first modification.
Now my fiesta ST is tight in all areas. Many thanks.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Easy install May 20, 2017
Reviewer: Patrick Eide from CA United States  
Good price, easy install very little change in vibration. Great mod!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
mountune roll restrictor/rear motor mount, fiesta April 27, 2017
Reviewer: paul  
It was easy to install. I have not noticed any change in NVH since installation. A good improvement

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Fiesta Performance
Fiesta Performance > Fiesta Drivetrain
Fiesta Performance > Ford Fiesta EcoBoost 1.0L / 1.6L Ti-VCT