Skip to product information
1 of 5

Cobb Tuning

COBB Accessport V3 ECU Flasher - F-150 Raptor

COBB Accessport V3 ECU Flasher - F-150 Raptor

SKU:AP3-FOR-005

Regular price $725.00
Regular price $725.00 Sale price $725.00
Sale Sold out

Accessport orders are usually processed in 5-7 business days from the time the order is placed.

Simple ECU flashing with gauge package! The new in-cabin mountable Accessport V3 has a large, full-color, higher-resolution screen which allows you to monitor up to six parameters in real-time. Fully customizable from the look (multiple bezel colors), layout (set up race, street, or dyno gauge clusters), and mounting options (choose from 1,000s of standard vehicle mounts). And what's looks without brains? More processing power, memory, and storage to flash faster while saving all of your maps and logs. This is your new Accessport.

The Accessport is the industry-leading OEM ECU flashing, managing, and monitoring assistant. Unlock power hidden within the ECU by replacing conservative factory settings with more aggressive calibrations. The results are impressive gains in torque and horsepower.

With over 20 years of Ford 4-cylinder ECU calibration experience it's no surprise that mountune partners with leading race and rally teams across the globe. This Accessport is not locked and can be further adjusted at any time.

FORD RAPTOR SPECIFIC FEATURES:

AUTO START-STOP ADJUSTMENT: A common complaint with the Raptor was the bothersome auto start/stop setting. There was no easy way to turn it off and keep it off with subsequent key cycles. The Auto Start-Stop feature accomplishes just that! With this feature you can set enable/disable Auto Start-Stop and the setting will be retained even after the vehicle is turned off. To use this feature go to “Tune” > “Adjustments” > “Auto Start-Stop” > and then select “1” if you want it to be enabled or “0” to disable.

FUEL PUMP CONTROL: You guessed it. This feature allows control of the in-tank fuel pump. This is especially useful if you want to drain the fuel tank to run different fuels, depressurize the fuel system to change injectors, or are needing to drain the fuel tank for any other reason. To use this feature (see Accessport steps below), with the engine running set the value to -1. This will turn off the fuel pump and the engine will shut down when fuel pressure reaches its lowest. You can then disconnect the fuel line and route it to a container. You can then key ON and set the value to 1 turning the fuel pump back on which would then drain your fuel tank.

DYNAMIC PEDAL CONTROL: This feature can be used to enhance or dull your accelerator pedal response. You can set this value from -5 to 10. Each reduction from 0 to -5 will decrease pedal response by 20%. This could be useful if you’re wanting to limit power or fuel consumption. Each increment from 0 to 10 will increase your pedal response by 10%. This will make the truck feel faster since the throttle will open more with less pedal input. Below is a graphical representation comparing throttle pedal input (x axis) with the amount the throttle body is opening (y axis) for each setting. Also shown is the pathway on the Accessport to adjust this setting.

VALET MODE: Valet Mode can be used to reduce maximum power output by limiting throttle to about 25%. A value of 1 will enable valet mode. A value of 0 will return to normal. This setting will be retained even through key cycles and does not require changing maps! Below shows how to adjust Valet Mode on the Accessport. 

 

EMISSIONS

50 State Legal.
This part is legal for sale and use on Emissions Controlled Vehicles in all 50 states when used in accordance with the manufacturer's application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number:
D-660-23
D-660-108

 

FEATURES

  • Larger, full color, higher resolution screen
  • Customizable multi-gauge display
  • In vehicle mount, with on/off switch
  • Faster and easier to use with a familiar face
  • Interchangeable faceplates

Return Policy

You have 7 calendar days to return an item from the date you received it. To be eligible for a return, your item must be unused and in the same condition that you received it. Your item must be sealed in the original packaging. Your item needs to have a receipt or proof of purchase. Some exclusions apply.

For additional details see our Return & Refund Policy.

Installation Guides

To see all available installation and break-in instructions, click here.

Disclaimers & Legal

This part has been designed and is intended for off-highway application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations relating to emission requirements and motor vehicle safety standards.

Click Here for emissions compliance information.

California Residents Prop 65 Information
California’s Proposition 65 entitles California consumers to special warnings for products that contain chemicals known to the state of California to cause cancer and birth defects or other reproductive harm if those products expose consumers to such chemicals above certain threshold levels. This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information visit www.P65warnings.ca.gov.

View full details
  • Free Shipping Sitewide

    Orders of $100.00 or more are eligible for free ground shipping within the lower 48 US states. Some restrictions apply.

    Learn More 
  • Earn Rewards With Every Purchase

    Simply sign up for free and start earning points for every purchase you make. Redeem your points for discounts or exclusive mountune merchandise.

    Learn More