Home > Motorsport > Race Engines & Components >

Mountune High Pressure Oil Pump - Ford EcoBoost 2.0L and 2.3L
Mountune High Pressure Oil Pump - Ford EcoBoost 2.0L & 2.3L | Mountune

Alternative Views:

WARNING : California Residents Prop 65 Information

Availability: Usually Ships in 1 to 2 Days
Product Code: 2536-OP-AA


Mountune High Pressure Oil Pump - Ford EcoBoost 2.0L and 2.3L

  • Focus ST 2013-2018
  • Focus RS 2016-2018
  • Mustang EcoBoost
  • Most Ford 2.0L and 2.3L EcoBoost engines

Developed and validated on the track and our exclusive oil pump test dyno, the Mountune High Pressure Oil Pump has been engineered to increase oil pressure by up to 15%, ensuring improved oil supply to critical engine components.

The Mountune Blueprinted High Pressure Oil Pump for 2.0L and 2.3L Ford EcoBoost engine is designed for high performance and track use. High Performance and Race engines typically require additional oil pressure and flow because of the increased demand placed upon various components within the engine. Additionally, oil pressure can gradually drop off as oil temperatures increase during sustained track and continued high rpm use.

The Mountune High Pressure Oil Pump starts life as a genuine Ford oil pump and is upgraded by our technicians in house for increased oil pressure, helping to ensure improved lubrication preventing engine bearing damage and engine failure due to sustained high RPM operation. Pressure may be increased by up to 15% via it’s configurable shim feature, and is factory set by our technicians at a recommended 10% over stock. This can be adjusted if required but we have determined this pressure setting to be ideal in most cases. Suggested applications include drag, track day and race use or any high performance engine build.

Starting with a new genuine Ford oil pump, we disassemble and inspect the components to ensure the base parts are within specification. Then each inner and outer pump rotor set receives WPC surface treatment to improve surface finish allowing the pump to operate more efficiently. Each pump housing is machined to receive our adjustable Pressure Relief Valve (PRV) assembly. We then “blueprint” the housing components to ensure smooth and efficient oil flow. Our technicians then assemble the components and pre-shim the PRV adjustment to specification.

  • Track and Dyno tested and validated
  • Adjustable pressure
  • WPC Treated pump rotor set


This part has been designed and is intended for off-highway application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations relating to emission requirements and motor vehicle safety standards. Click Here for Emissions compliance information.

Recommended product
2.0L/2.3L Complete EcoBoost Oil Control System Radium Engineering PCV Catch Can Kit - Focus ST/RS


2.0L/2.3L Complete Ecoboost Oil Control System (2536-Oc-Aa) | Mountune Radium Engineering Pcv Catch Can Kit - Ford Focus St/Rs Performance | Mountune

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
5 of 5 February 9, 2021
Reviewer: Andrzej Świątek from Międzylesie , Dolnyśląsk Polska  

Was this review helpful to you?

Browse for more products in the same category as this item:

Motorsport > Race Engines & Components
Shop Performance > Ford Focus Performance
Shop Performance > Ford Focus Performance > Focus RS Performance Parts
Motorsport > Race Engines & Components > 2.3L Ford EcoBoost Engines and Components
Motorsport > Race Engines & Components > 2.0L Ford EcoBoost Engines and Components