If you’re looking for more power from your Ranger, the best place to start is with our 2019-2022 Ford Ranger calibration kit. This Ford Ranger calibration system was developed by Ford Performance to improve the performance of a stock engine, while meeting emissions requirements in all 50 states. It delivers up to 45 HP and 60 lb-ft. of torque over the stock tune, while improving drivability across the RPM range. It also includes transmission programming, changing the shift points to get the most from the increase in power.
The Ford Ranger calibration kit comes with a Pro Cal 4 calibration delivery tool and a Ford Performance high flow K&N filter. When installed by a certified technician, it’s covered by a three year /36,000 mile warranty. Using the Pro Cal tool, you can switch between the performance and stock tunes as needed.
Ford Performance calibration for 2019-2021 Ranger EcoBoost.
The Ford Performance engineered performance calibration is a 50 state legal calibration for your 2019-2021 Ford Ranger that increases power and improves drive-ability throughout the rpm range.
Ford Performance engineered and dyno tested. Improved drive-ability and throttle response throughout RPM range.
Optimized transmission shift schedule
- Horsepower gain: 45 HP @ 4,500 RPM
- Torque gain: 60 lb/ft @ 2,500 RPM
- For U.S. and Canadian vehicles
- Comes with Ford Performance 3yr/36k mile warranty from new vehicle in-service when installed by a Ford dealer or ASE/Red Seal certified technician
- Tire size configurable up to 265/70/17
- Premium fuel only
- Includes Ford Performance Pro Cal 4 calibration delivery tool M-12655-F
- Includes Ford Performance high-flow K&N® air filter
- Stock and Ford Performance calibrations are selectable with Pro Cal tool.
Ford Performance has a long history of offering performance engine calibrations. These calibrations offer an enhanced driving experience. They are developed by Ford Performance calibration engineers during countless hours of dyno testing and real time ‘seat-of-the-pants’ drive-ability evaluation. The resulting calibrations offer improved power, drive-ability, and pass Ford Performance’s stringent durability tests. Performance calibrations are available for U.S. and Canadian vehicles. Premium fuel is required.
A performance engine calibration for the Ranger? What are the high-lights?
The Ford Performance calibration for the 2.3L EcoBoost in the Ranger adds torque and horsepower throughout the RPM range. It also improves the throttle response offering better drive-ability. There is a 45 HP gain at 4,500 RPM. There is a 60 lb/ft of torque gain at 2,500 RPM. There is also an optimized shift schedule for the 10-speed automatic transmission. Drivers will feel crisper, more precise shifts.
How is the M-9603-REB Ranger calibration installed in the vehicle?
The Ranger calibration is delivered with the new Ford Performance Pro Cal 4 tool. When you order the Ranger calibration, you will receive the Pro Cal 4 tool, a voucher to register and a performance air filter. You download the Pro Cal 4 software to your computer and connect the tool with the provided USB cable. The Pro Cal 4 tool will automatically update. The Pro Cal 4 tool then connects to the OBD 2 port located under the driver’s side dash.
Why a new Pro Cal tool?
The engineers wanted to upgrade the capabilities of the Pro Cal tool. The Pro Cal 4 not only delivers the performance calibration, it also stores the stock file, allows real-time monitoring of engine parameters, reads and clears DTCs, real-time data logging, and can configure tire size changes within certain parameters. It features a high-resolution touch screen and intuitive graphical interface. The tool has a rubberized protective case and even comes with a suction cup to mount to the corner of your windshield.
Is this calibration legal in California?
Yes, Ford Performance spends great deal of time, energy, and resources to certify our performance calibrations for emissions for all 50 states – California included. Ford Performance tests and certifies our calibrations meet the proper C.A.R.B. standards.
Do the Ford Performance calibrations have a C.A.R.B. Executive Order (EO) number?
The M-9603-REB Ranger calibration EO number is D-752-12. The kits come with their C.A.R.B. EO number printed on labels for owners to apply to pass inspection. MY 2019-2021 only.
Do Ford Performance calibrations have a warranty?
Ford Performance calibrations are unique because they come with their own Ford warranty. If the Ford Performance calibration causes an issue to your car within 3 years or 36,000 miles from new vehicle in-service, Ford pays to fix your car. If the performance calibration did not cause the issue, your base Ford warranty still applies. The kits need to be installed by an A.S.E. certified shop or Ford dealer. In Canada, Red Seal certified technicians also can install Ford Performance calibrations to maintain warranty eligibility.
What about competitors’ calibrations?
Ford does not and cannot warranty non-Ford calibrations. Ford does not develop or test them and therefore will not cover any affected parts damaged by a non-Ford calibration. They do not test and develop to Ford’s durability standards.
Notice : Accessport flashers, optimized calibrations, optimized calibration service time, or any other electronic tuning device cannot be returned. No exceptions