mountune MRX Cylinder Head w Camshafts - 2.3L EcoBoost

Mountune Mrx Cylinder Head, 2.3L Ecoboost (2536-Mha-Aa) | Mountune

Alternative Views:

WARNING : California Residents Prop 65 Information

Availability: Usually Ships in 1 to 2 Weeks
Product Code: 2536-MHA-AA

Camshaft Option:


mountune MRX Cylinder Head - 2.3L EcoBoost

2016-2018 Focus RS
2015-2020 Mustang EcoBoost

The mountune MRX Cylinder head upgrade for the 2.3L EcoBoost (Focus RS / Mustang EcoBoost) features dyno and flow bench tested improvements that produce maximum reliable power across a wide RPM range. Each cylinder head is based on a new genuine Ford RS casting that is inspected before receiving a precision NEWEN valve seat profile. The throat of each port is opened up to remove obstructions and then blended into the valve seat to improve flow.

Each head is then ultrasonically cleaned before assembly by one of our motorsport professionals using High Performance Valves along with dual valves springs matched to our V2 or V3 camshafts. This head is ideal for those running a larger than stock turbocharger.

The head ships completely assembled with valve lash set using all new cam followers and ready to install on you engine.

Intake airflow is improved by 44% and exhaust air flow is improved by 28% compared to an otherwise stock 2.3L Cylinder head.
Testing on our in-house engine dyno shows the V3 Camshaft version has improvement of +44HP and +53lb-ft compared to the stock cylinder head with standard camshafts on an otherwise identical engine.

Intake valve seats feature multi angle profile, Exhaust valve seats feature radiused profile.

  • Increased power and torque
  • Assembled from all new parts, no core is required
  • Dyno and flow bench proven

V2 Camshaft Specification Option:
  • Intake Duration 256° (OE Duration 234°)
  • Exhaust Duration 244° (OE Duration 224°)
  • Intake Valve Lift 9.60mm (OE 8.00mm)
  • Exhaust Valve Lift 8.53mm (OE 6.99mm)
The V2 Camshafts offer good all around drivability while providing excellent power and response. We recommend these for most applications.

V3 Camshaft Specification Option:
  • Intake Duration 264° (OE Duration 234°)
  • Exhaust Duration 256° (OE Duration 224°)
  • Intake Valve Lift 10.85mm (OE 8.00mm)
  • Exhaust Valve Lift 9.70mm (OE 6.99mm)
The V3 Camshaft option works well with larger than stock turbochargers and enhances high RPM power level. Because of the longer duration and higher lift, rough idle should be expected and considerable tuning effort may be required for these camshafts to function correctly. Additionally, extra care must be taken during the tuning process to control valve timing to ensure there is no contact between the valves and pistons.

High performance Intake and Exhaust valve set for the Ford EcoBoost 2.3L engine along with our motorsport valve stem seals. This is the same setup we use in all of our MRX Engine and Cylinder head builds and has been proven in all forms of applications including high performance street and drag racing. Intake valves feature a black Nitrided coating over stainless steel, exhaust valves are sodium filled Inconel to withstand ultra high temperatures.
Intake Valve Details
  • Head Diam: 32.5mm
  • Stem Diam: 5.47mm
  • Length: 103.3mm
  • Material: Black Nitrided Single groove

Exhaust Valve Details
  • Head Diam: 30mm
  • Stem Diam: 5.46mm
  • Length: 104.70mm
  • Valve Type: Exhaust
  • Material: Sodium . Inconel

Valve Stem Seal Details
  • FKM Rubber
  • Metal Body

V3 Cams

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  1 of 1 people found the following review helpful:
5 of 5 Great Service! September 21, 2019
Reviewer: Michael Kulp from Long Island City, NY United States  
I've ordered several products from Mountune. Excellent quality and timely delivery every time. Haven't installed the head yet - I'll follow up with my evaluation based on my "seat o pants" meter...

Was this review helpful to you?

Browse for more products in the same category as this item:

Motorsport > Mountune Racing Engines > Ford EcoBoost 4-Cyl. Engines
Motorsport > Mountune Racing Engines
Parts & Components > Browse by Manufacturer
Parts & Components
Shop Performance
Parts & Components > Browse by Components
Parts & Components > Browse by Components > Crate Engines > Complete Engine Heads
Parts & Components > Browse by Engine
Parts & Components > Browse by Manufacturer > Mountune Racing Engines
Parts & Components > Browse by Engine > Ford EcoBoost Engines > 2.3L Ford EcoBoost Engines
Shop Performance > MRX Performance Series
Shop Performance > MRX Performance Series > MRX Series for Focus RS/ST
Parts & Components > Browse by Engine > Ford EcoBoost Engines

Parts & Components > Browse by Components > Crate Engines