|
 |
 |
 |
 |
Quaife ATB LSD Install - Fiesta ST |
May 30, 2020 |
Reviewer:
Marc from PRINCE GEORGE, BC Canada
|
|
This upgrade while the most expensive I've done to this car is probably the most positive in terms of results, the traction out of corners is rather impressive really changes the dynamics of the car. I have the full MR230 hardware with mountune custom tune, the car now feels more confidant in all corners from entry to exit. I bought the Ford Performance differential kit from mountune, you also need Ford differential shims, transmission case bolts. I bought the input/output shaft bearing kit with comes with input/output case shaft bolts (6), (2) end bolts, input/output shaft bearings and input shaft seal. All of these bolts I talked about above the Ford service manual recommends replacing them. Would recommend buying this input/output bearing kit from Ford AV6Z-7L149-A. While having the transmission apart I had a X-Clutch w/ chromoly flywheel w/ improved inertia installed. I went with Motul DCTF fluid but went back Ford DCTF, too notchy. The smile on face is even bigger now :)
Was this review helpful to you?
|
 |
 |
 |
 |
|