COBB Accessport V3 ECU Flasher Ford Focus ST 2013-2018 B2 Package
COBB Accessport V3 ECU Flasher Ford Focus ST 2013-2018 with mountune Low Restriction Intake and Intercooler Upgrade
- COBB Accessport V3
- mountune Low Restriction Intake
- mountune Black Intercooler Upgrade
- mountune Custom Calibration
- mountune Badge
The mountune Focus ST B2 upgrade package includes the very best components to enhance the performance of your Focus ST including custom calibration to optimize the performance of your car based on your specific use and build spec. mountune performance calibrations are proven to extract the maximum performance from the Focus ST and the mountune B2 package brings together the essential pieces to get you going.
The Accessport is the industry leading OEM ECU flashing, managing and monitoring assistant. Unlock power hidden within the ECU by replacing conservative factory settings with more aggressive calibrations. The standard Cobb Accessport from mountune USA includes all of the standard Cobb calibrations along with a custom mountune calibration* built to your specifications based on your modifications, octane, and preferences. The results are impressive gains in torque and horsepower with incredible custom features that can be adjusted to meet your requirements. With over 15 years of Ford 4 cylinder ECU calibration experience it's no surprise that mountune USA are partners with Team O'Neil Motorsports, LaRoza Racing, and O.D.D. Racing. And with multiple Rally America Championships won using mountune USA custom calibrations, our programming team has more Focus ST tuning experience than any other source available to you.
Mountune Performance calibration slot assignments
The mountune calibrations include 4 slots that are switchable at any time, on the fly, by simply pushing a few buttons. This is a very convenient feature that can be further adjusted in many cases. The default settings for the Focus ST are laid out as such:
- Slot 1 - Standard high performance calibration
- Slot 2 - Standard high performance calibration with indicated Launch Control
- Slot 3 - Low boost performance calibration
- Slot 4 - Same as slot 1 with LESS spark (aka panic mode / bad fuel mode)
Maximize the performance of your Focus ST
For those who require additional support, the mountune ECU calibration can be optimized further with data logging and program revisions at no extra charge. Engine performance is enhanced by reviewing data logging files along with calibration revisions based on feedback from the end user. The duration of the calibration and file revision period for the chosen fuel type / octane is 45 days from the time the first file is sent to the customer, which is preloaded onto the AP when it ships out. Multiple calibrations can also be requested during this time period. Once the 45 day period has expired the free custom calibration period ends. Future custom calibrations are subject to additional fees depending on the exact nature of the request. mountune optimized Accessport calibrations are available only to customers who have purchased the Cobb Accessport directly from mountune.
Custom programming options include, but are not limited to:
- On-the-Fly MAP (slot) switching
- Launch Control settings**
- Flat Foot Shifting settings**
- Ethanol (E30 & E40) support
- 100+ Octane support
- Gear Based Torque Limiting
- Shift Assist settings
- Burn Out Mode
- Idle Adjustment
- Rev Limiters
- Speed Limiters
- Shift Light settings
- Advanced Wastegate Adjustments
- Low Traction / Wet Weather settings
*Please note this free offer for calibration optimization is not available for turbocharger upgrades, engine swaps, or nitrous oxide applications and applies to the original purchaser only. This service is non-transferable and other restrictions may apply. Some custom options are only available on vehicles equipped with manual transmissions. If you have questions about our mountune ECU calibrations please do not hesitate to contact us directly at (714) 424-9400 or at email@example.com for more information.
**Launch control & flat foot shifting can be adjusted anytime via the Accessport. By default launch control is set at 2400 RPM and flat foot shifting is set at 4000 RPM.
Ford Focus ST with mountune ECU calibration.
This part has been designed and is intended for off-highway application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations relating to emission requirements and motor vehicle safety standards. Click Here for Emissions compliance information.