mountune MR230 Complete Performance Upgrade
Fiesta ST 2014-2018
As the name suggests, the MR230 upgrade kit delivers
a performance increase to 230PS (227hp) at 5500rpm with 340Nm (250 ft.lb) of
torque available from 3000rpm.
The MR230 includes a complete list of engineered
components along with a revised performance ECU calibration to deliver maximum
reliable performance. The MR230 upgrade includes our high flow induction kit ,
high-flow silicone induction hose and intercooler charge pipe upgrade kit with
our uprated alloy intercooler. Completing the upgrade we include our high-flow
downpipe with 200-cell unit and a twin-tip cat-back exhaust system. All hardware
can be added in a modular fashion except the downpipe, which is recommended to
be installed together with the MR230 calibration.
mountune's engineers spent a great deal of time
developing this kit to ensure that it delivers the optimum level of performance
with the OE turbocharger, while maintaining the maximum possible reliability of
the engine and transmission components. As part of the upgrade, the cam timing
has also been optimized in the calibration. The revised cam timing provides a
definite improvement in power and also helps hold on to the torque higher up in
the rev range.
The end result is a very refined, OE-like day-to-day
driving experience you've come to expect from a mountune calibration with an
incredible increase in power and torque once you’ve increase to full throttle.
The turbocharger spools into action, delivering a wave of torque that's
difficult not to smile at, with an induction and exhaust note that's hard not
to enjoy in equal measure!
For customers running the market-leading MP215
upgrade, the MR230 delivers a whole lot more of the same torque-related
characteristics, but with a noticeably stronger top-end, and for those with a
standard Fiesta ST, the change in performance is understandably, dramatic.
With the kit installed, the 0-60mph time drops to 5.9
seconds, a full 1-second improvement over the standard model In-gear and
midrange acceleration is improved upon even more substantially thanks to the
340Nm readily on hand.
*Note: Intake Hose not compatible with MY 2016 and 2017 Fiesta ST.
Includes the following
- mountune Intercooler Upgrade (black or silver)
- mountune Intercooler Charge Pipe Upgrade (specific
- mountune Sport Down Pipe
- mountune High Flow Exhaust System
- mountune Induction Upgrade Kit
- mountune mTune with MR230 High Performance ECU
- mountune MR Racing Badge
This part has been designed and is intended for off-highway application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations relating to emission requirements and motor vehicle safety standards. Click Here for Emissions compliance information.